DES-6500
DES-6500:4#config bandwidth_control 1:10 tx_rate 10
Command: config bandwidth_control 1:10 tx_rate 10
Success.
DES-6500:4#
show bandwidth_control
Purpose
Used to display the bandwidth control configuration on the switch.
Syntax
show bandwidth_control {<portlist>}
Description
The
show bandwidth_control
command displays the current
bandwidth control configuration on the switch, on a port-by-port basis.
Parameters
<portlist>
−
Specifies a range of ports to be configured. The port list is
specified by listing the lowest slot number and the beginning port
number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are
seperated by a dash. For example, 1:3 specifies slot number 1, port 3.
2:4 specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
between slot 1, port 3 and slot 2, port 4
−
in numerical order.
Restrictions None.
Example usage:
To display bandwidth control settings:
DES-6500:4#show bandwidth_control 1-10
Command: show bandwidth_control 1-10
Bandwidth Control Table
Port RX Rate (Mbit|sec) TX_RATE (Mbit|sec)
---- ------------------------ ----------------------
1 no_limit 10
2 no_limit 10
3 no_limit 10
4 no_limit 10
5 no_limit 10
6 no_limit 10
7 no_limit 10
8 no_limit 10
9 no_limit 10
10 no_limit 10
DES-6500:4#
Summary of Contents for TM DES-6500
