DES-6500
DES-6500:4# config scheduling 0 max_packet 15
Command: config scheduling 0 max_packet 15
Success.
DES-6500:4#
show scheduling
Purpose
Used to display the currently configured traffic scheduling on the switch.
Syntax
show scheduling
Description
The
show scheduling
command displays the current configuration for
the maximum number of packets (
max_packets
) assigned to the eight
priority queues
on the switch. At this value, it will empty the eight
hardware queues in order, from the highest priority (queue 6) to the
lowest priority (queue 0).
Parameters None.
Restrictions
None.
Example usage:
To display the current scheduling configuration:
DES-6500:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets
-------------------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
DES-6500:4#
config 802.1p user_priority
Purpose
Used to map the 802.1p user priority of an incoming packet to one of
the eight hadware queues available on the switch.
Summary of Contents for TM DES-6500
