4 Configuration
D-Link Web Smart Switch User Manual
30
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no default name, and all ports as “Untagged”
Rename:
Click to rename the VLAN group.
Delete VID:
Click to delete the VLAN group.
Add New VID:
Click to create a new VID group, assigning ports from 01 to 28 as
Untag
,
Tag
, or
Not
Member
. A port can be untagged in only one VID. To save the VID group, click
Apply.
You may change the name accordingly to the desired groups, such as R&D, Marketing, email, etc.
Figure 4.35 – Configuration > 802.1Q VLAN
Figure 4.36 – Configuration > 802.1Q VLAN > Add VLAN
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click
Apply
to implement
changes made.
Figure 4.37 – Configuration > 802.1Q VLAN PVID
VLAN > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled. There can only be one management VLAN at a time.
Figure 4.38 – Configuration > 802.1Q Management VLAN
VLAN > Voice VLAN > Voice VLAN Global Settings
Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned
VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the security of
