xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
112
Command: create vlan v1 tag 2
Success.
DES-3800:4#
delete vlan
Purpose
Used to delete a previously configured VLAN on the Switch.
Syntax
delete vlan <vlan_name 32>
Description
This command will delete a previously configured VLAN on the
Switch.
Parameters
<vlan_name 32>
−
The VLAN name of the VLAN you want to delete.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To remove the vlan “v1”:
DES-3800:4#delete vlan v1
Command: delete vlan v1
Success.
DES-3800:4#
config vlan
Purpose
Used to add additional ports to a previously configured VLAN.
Syntax
config vlan <vlan_name 32> {[add [tagged | untagged |
forbidden] | delete] <portlist> | advertisement [enable | disable]}
Description
This command allows you to add ports to the port list of a previously
configured VLAN. You can specify the additional ports as tagging,
untagging, or forbidden. The default is to assign the ports as
untagging.
Parameters
<vlan_name 32>
−
The name of the VLAN you want to add ports to.
add
−
Entering the add parameter will add ports to the VLAN. There
are three types of ports to add:
•
tagged
−
Specifies the additional ports as tagged.
•
untagged
−
Specifies the additional ports as untagged.
•
forbidden
−
Specifies the additional ports as forbidden
delete
−
Deletes ports from the specified VLAN.
<portlist>
−
A port or range of ports to add to, or delete from the
specified VLAN.
advertisement [enable | disable]
−
Enables or disables GVRP on the
specified VLAN.
Restrictions Only
administrator-level users can issue this command.
