xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
144
config dhcp_relay add ipif
Purpose
Used to add an IP destination address to the switch's DHCP/BOOTP re
lay table.
Syntax
config dhcp_relay add ipif <ipif_name 12> <ipaddr>
Description
This command adds an IP address as a destination to forward (relay)
DHCP/BOOTP relay packets to.
Parameters
<ipif_name 12>
The name of the IP interface in which DHCP relay is to be
enabled.
<ipaddr>
The DHCP server IP address.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To add an IP destination to the DHCP relay table:
DES-3800:4#config dhcp_relay add ipif System 10.58.44.6
Command: config dhcp_relay add ipif System 10.58.44.6
Success.
DES-3800:4#
config dhcp_relay delete ipif
Purpose
Used to delete one or all IP destination addresses from the Switch'
s DHCP/BOOTP relay table.
Syntax
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Description
This command is used to delete an IP destination addresses in the Switch’s
DHCP/BOOTP relay table.
Parameters
<ipif_name 12>
The name of the IP interface that contains the IP address below.
<ipaddr>
The DHCP server IP address.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete an IP destination from the DHCP relay table:
DES-3800:4#config dhcp_relay delete ipif System
10.58.44.6
Command: config dhcp_relay delete ipif System 10.58.44.6
Success.
DES-3800:4#
