xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
152
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
show 802.1x auth_state
Purpose
Used to display the current authentication state of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_state {ports <portlist>}
Description
The show 802.1x
auth_state
command is used to display the current
authentication state of the 802.1x Port-based or MAC-based Network Access
Control server application on the Switch.
Parameters
ports <portlist>
−
Specifies a port or range of ports to be viewed.
The following details what is displayed:
Port number
−
Shows the physical port number on the Switch.
Auth PAE State: Initalize / Disconnected / Connecting / Authenticating /
Authenticated / Held / ForceAuth / ForceUnauth
−
Shows the current state of the
Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initalize / Success / Timeout
−
Shows the current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized
−
Shows the result of the authentication
process. Authorized means that the user was authenticated, and can access the
network. Unauthorized means that the user was not authenticated, and cannot
access the network.
Restrictions None.
Example usage:
To display the 802.1x auth state for Port-based 802.1x:
DES-3800:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port Auth PAE State Backend State Port Status
------ ----------------------- --------------------- -----------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
6 ForceAuth Success Authorized
7 ForceAuth Success Authorized
8 ForceAuth Success Authorized
9 ForceAuth Success Authorized
10 ForceAuth Success Authorized
