xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
245
To display OSPF area aggregation settings:
DES-3800:4#show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
------------ --------------------- -------------- -------------
10.1.1.1 10.0.0.0/8 Summary Enabled
10.1.1.1 20.2.0.0/16 Summary Enabled
Total Entries: 2
DES-3800:4#
show ospf lsdb
Purpose
Used to display the OSPF Link State Database (LSDB).
Syntax
show ospf lsdb {area_id <area_id> | advertise_router <ipaddr>
| type [rtrlink | netlink | summary | assummary | asextlink]}
Description
This command will display the current OSPF Link State Database
(LSDB).
Parameters
area_id <area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
advertise_router <ipaddr>
−
The router ID of the advertising router.
type [rtrlink | netlink | summary | assummary | asextlink]
−
The type
of link.
Restrictions None.
NOTE:
When this command displays a “
*
” (a star symbol) in
the OSPF LSDB table for the
area_id
or the
Cost
, this is
interpreted as “no area ID” for external LSAs, and as “no cost
given” for the advertised link.
Usage Example:
To display the link state database of OSPF:
DES-3800:4#show ospf lsdb
Command: show ospf lsdb
Area LSDB Advertising Link State Cost Sequence
ID Type Router ID ID Number
----------- -------------- ------------------ ------------------ ------- -----------------
0.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000002
0.0.0.0 Summary 50.48.75.73 10.0.0.0/8 1 0x80000001
1.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000001
