xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
83
config stp mst_ports
priority <value 0-240>
- Enter a value between 0 and 240 to set
the priority for the port interface. A higher priority will designate the
interface to forward packets first. A lower number denotes a higher
priority.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To designate ports 1 to 2 on, with instance ID 0, to have an auto internalCost and a priority of 0:
DES-3800:4#config stp mst_ports 1-2 instance_id 0 internalCost
auto priority 0
Command: config stp mst_ports 1-2 instance_id 0 internalCost auto
priority 0
Success.
DES-3800:4#
show stp instance_id
Purpose
Used to display the Switch’s current STP configuration.
Syntax
show stp
Description
This command displays the Switch’s current STP configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3800:4#show stp
Command: show stp
STP Status : Enabled
STP Version : STP Compatible
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Age : 20
TX Hold Count : 3
Forwarding BPDU : Enabled
DES-3800:4#
Status 2 : STP enabled for RSTP
DES-3800:4#show stp
Command: show stp
