![background image](http://html1.mh-extra.com/html/d-link/xstack-dgs-3120-24pc/xstack-dgs-3120-24pc_manual_3500718373.webp)
xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
369
Format
config address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports
[<portlist> | all]}
Parameters
ipaddress
- Specify the IP address of the entry being updated.
<ipaddr>
- Enter the IP address used here.
mac_address
- Specify the MAC address of the entry being updated
<macaddr>
- Enter the MAC address used here.
ports
- (Optional) Specify which ports are used for the IMPB entry being updated. If not specified,
then it is applied to all ports.
<portlist>
- Enter the list of port used here.
all
- Specify that all the ports will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an IMPB entry:
DGS-3120-24TC:admin# config address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3120-24TC:admin#
36-6
show address_binding
Description
This command is used to display the IMPB global settings or IMPB settings on specified ports.
Format
show address_binding {ports {<portlist>}}
Parameters
ports
- (Optional) Specify the ports for which the information is displayed. If not specified, all
ports are displayed.
<portlist>
- (Optional) Enter the list of ports used here.
Restrictions
None.
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...