xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
383
<ipif_name 12>
- Enter the IP interface name here. This name can be up to 12 characters
long.
all
- Specify that all the interface will be displayed.
ipv6address
- The neighbor’s address.
<ipv6addr>
- Enter the IPv6 address here.
static
- Static neighbor cache entry.
dynamic
- Dynamic entries.
all
- All entries include static and dynamic entries.
Restrictions
None
Example
Show all neighbor cache entries of IP interface “System”:
DGS-3120-24TC:admin#show ipv6 neighbor_cache ipif System all
Command: show ipv6 neighbor_cache ipif System all
3FFC::1 State: Static
MAC Address : 00-01-02-03-04-05 Port : NA
Interface : System VID : 1
Total Entries: 1
DGS-3120-24TC:admin#
37-4
config ipv6 nd ns retrans_time
Description
This command is used to configure the IPv6 ND neighbor solicitation retransmit time, which is
between retransmissions of neighbor solicitation messages to a neighbor when resolving the
address or when probing the reachability of a neighbor.
Format
config ipv6 nd ns ipif <ipif_name 12> retrans_time <millisecond 0-4294967295>
Parameters
ipif
- The IPv6 interface name
<ipif_name 12>
- Enter the IP interface name here. This name can be up to 12 characters
long.
retrans_time
- Neighbor solicitation’s re-transmit timer in millisecond.
<millisecond 0-4294967295>
- Enter the re-transmit timer value here. This value must be
between 0 and 4294967295 milliseconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...