xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
476
DGS-3120-24TC:admin#show mac_based_access_control auth_state ports 1:1-1:4
Command: show mac_based_access_control auth_state ports 1:1-1:4
(P): Port-based
Port MAC Address State VID Priority Aging Time/
Block Time
---- -------------------- -------------- ---- -------- ------------
Total Authenticating Hosts : 0
Total Authenticated Hosts : 0
Total Blocked Hosts : 0
DGS-3120-24TC:admin#
46-18
config mac_based_access_control max_users
Description
This command is used to configure the maximum number of authorized clients.
Format
config mac_based_access_control max_users [<value 1-1000> | no_limit]
Parameters
max_users
- Specify to set the maximum number of authorized clients on the whole device. N is
project dependent.
<value 1-1000>
- Enter the maximum users here. This value must be between 1 and 1000.
no_limit
- Specify to not limit the maximum number of users on the system. By default, there
is no limit on the number of users.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of users of the MAC-based Access Control system supports to
128:
DGS-3120-24TC:admin# config mac_based_access_control max_users 128
Command: config mac_based_access_control max_users 128
Success.
DGS-3120-24TC:admin#
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...