xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
622
Chapter 67
RPC PortMapper Command
List
config filter rpc_portmapper
[<portlist> | all] state [enable | disable]
show filter rpc_portmapper
67-1
config filter rpc_portmapper
Description
This command is used to configure the Switch to deny TCP/UDP packets with port number 135 on
the network.
Format
config filter rpc_portmapper [<portlist> | all] state [enable | disable]
Parameters
<portlist>
- Specify a list of ports to be configured for the RPC portmapper filter state.
all
- Specify all ports to be configured for the RPC portmapper filter state.
state
- Specify the RPC portmapper filter state.
enable
- Enable the RPC portmapper filter on specified ports.
disable
- Disable the RPC portmapper filter on specified ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable RPC portmapper filter on unit 1 port 1 to port 10:
DGS-3120-24TC:admin#config filter rpc_portmapper 1:1-1:10 state enable
Command: config filter rpc_portmapper 1:1-1:10 state enable
Success.
DGS-3120-24TC:admin#
67-2
show filter rpc_portmapper
Description
This command is used to display the RPC portmapper filter state on the Switch.
Format
show filter rpc_portmapper
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...