xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
699
DGS-3120-24TC:admin#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Trap : Enabled
Linkchange Traps : Enabled
Coldstart Traps : Enabled
Warmstart Traps : Enabled
DGS-3120-24TC:admin#
76-35
config rmon trap
Description
This command is used to configure the trap state for RMON events.
Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]} (1)
Parameters
rising_alarm
- (Optional) Specify the trap state for rising alarm. The default state is enabled.
enable
- Specify that the rising alarm function will be enabled.
disable
- Specify that the rising alarm function will be disabled.
falling_alarm
- (Optional) Specify the trap state for falling alarm. The default state is enabled.
enable
- Specify that the falling alarm function will be enabled.
disable
- Specify that the falling alarm function will be disabled.
Restrictions
Only Administrator level can issue this command.
Example
To configure the trap state for RMON events:
DGS-3120-24TC:admin# config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DGS-3120-24TC:admin#
76-36
show rmon
Description
This command is used to display the RMON related setting.
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...