xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
737
Chapter 81
System Severity Command
List
config system_severity
[trap | log | all] [emergency | alert| critical | error | warning | notice |
information | debug | <level 0-7>]
show system_severity
81-1
config system_severity
Description
This command is used to configure the severity level control for the system.
When the user chooses a specific level to log or trap, messages at that severity level or more will
be logged or trapped to SNMP managers.
Format
config system_severity [trap | log | all] [emergency | alert| critical | error | warning | notice |
information | debug | <level 0-7>]
Parameters
trap
- Specify the severity level control for traps.
log
- Specify the severity level control for the log.
all
- Specify the severity level control for traps and the log.
emergency
- Severity level 0.
alert
- Severity level 1.
critical
- Severity level 2.
error
- Severity level 3.
warning
- Severity level 4.
notice
- Severity level 5.
information
- Severity level 6.
debug
- Severity level 7.
<level 0-7>
- Enter the severity level here. This value must be between 0 and 7.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure severity level control as information level for trap:
DGS-3120-24TC:admin#config system_severity trap warning
Command: config system_severity trap warning
Success.
DGS-3120-24TC:admin#
Summary of Contents for xStack DGS-3120-24PC
Page 1: ......
Page 42: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 38...
Page 168: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 164...
Page 765: ...xStack DGS 3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide 761...