xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1082
DGS-3120-24TC:admin# enable voice_vlan v2
Command: enable voice_vlan v2
Success.
DGS-3120-24TC:admin#
119-2
disable voice_vlan
Description
The command is used to disable the voice VLAN function on a switch. When the voice VLAN
function is disabled, the voice VLAN will become unassigned.
Format
disable voice_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the voice VLAN:
DGS-3120-24TC:admin# disable voice_vlan
Command: disable voice_vlan
Success.
DGS-3120-24TC:admin#
119-3
config voice_vlan priority
Description
This command is used to configure the voice VLAN priority. The voice VLAN priority will be the
priority associated with the voice VLAN traffic to distinguish the QoS of the voice traffic from data
traffic.
Format
config voice_vlan priority <int 0-7>
Parameters
priority
- The priority of the voice VLAN. The default priority is 5.
<int 0-7>
- Enter the priotity value here. This value must be between 0 and 7.
Summary of Contents for xStack DGS-3120 Series
