xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
125
dst_port_mask
- Specify the TCP destination port mask.
<hex 0x0-0xffff>
- Enter the TCP source port mask value here.
flag_mask
- (Optional) Specify the TCP flag field mask.
all
- Specify that the TCP flag field mask will be set to 'all'.
urg
- Specify that the TCP flag field mask will be set to 'urg'.
ack
- Specify that the TCP flag field mask will be set to 'ack'.
psh
- Specify that the TCP flag field mask will be set to 'psh'.
rst
- Specify that the TCP flag field mask will be set to 'rst'.
syn
- Specify that the TCP flag field mask will be set to 'syn'.
fin
- Specify that the TCP flag field mask will be set to 'fin'.
udp
- (Optional) Specify that the rule applies to UDP traffic.
src_port_mask
- Specify the UDP source port mask.
<hex 0x0-0xffff>
- Enter the UDP source port mask value here.
dst_port_mask
- Specify the UDP destination port mask.
<hex 0x0-0xffff>
- Enter the UDP destination port mask value here.
protocod_id_mask
- (Optional) Specify that the rule applies to IP protocol ID traffic.
<hex 0x0-0xff>
- Enter the protocol ID mask value here.
user_define_mask
- (Optional) Specify that the rule applies to the IP protocol ID, and that the
mask option behind the IP header length is 20 bytes.
<hex 0x0-0xffffffff>
- Enter the user-defined mask value here.
ipv6
- (Optional) Specify this is an IPv6 mask.
class
- (Optional) Specify the IPv6 class.
source_ipv6_mask
- (Optional) Specify an IPv6 source sub-mask.
<ipv6mask>
- Enter the IPv6 source sub-mask value here.
destination_ipv6_mask
- Specify an IPv6 destination sub-mask.
<ipv6mask>
- Enter the IPv6 destination sub-mask value here.
tcp
- (Optional) Specify that the following parameter are application to the TCP configuration.
src_port_mask
- Specify an IPv6 Layer 4 TCP source port mask.
<hex 0x0-0xffff>
- Enter the Ipv6 TCP source port mask value here.
dst_port_mask
- Specify an IPv6 Layer 4 TCP destination port mask.
<hex 0x0-0xffff>
- Enter the Ipv6 TCP destination port mask value here.
udp
- (Optional) Specify that the following parameter are application to the UDP configuration.
src_port_mask
- Specify an IPv6 Layer 4 UDP source port mask.
<hex 0x0-0xffff>
- Enter the Ipv6 UDP source port mask value here.
dst_port_mask
- Specify an IPv6 Layer 4 UDP destination port mask.
<hex 0x0-0xffff>
- Enter the Ipv6 UDP destination port mask value here.
icmp
- (Optional) Specify that the rule applies to ICMP traffic.
type
- Specify the type of ICMP traffic.
code
- Specify the code of ICMP traffic.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an egress access list profile with the name “eap-eth-bc” and assign the profile ID to be 1:
DGS-3120-24TC:admin# create egress_access_profile profile_id 1 profile_name
eap-eth-bc ethernet source_mac FF-FF-FF-FF-FF-FF
Command: create egress_access_profile profile_id 1 profile_name eap-eth-bc
ethernet source_mac FF-FF-FF-FF-FF-FF
DGS-3120-24TC:admin#
Summary of Contents for xStack DGS-3120 Series
