xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
294
Chapter 25
DHCP Relay Command List
config dhcp_relay
{hops <int 1-16> | time <sec 0-65535>}
config dhcp_relay add
ipif <ipif_name 12> <ipaddr>
config dhcp_relay add vlanid
<vlan_id_list> <ipaddr>
config dhcp_relay delete
ipif <ipif_name 12> <ipaddr>
config dhcp_relay delete vlanid
<vlan_id_list> <ipaddr>
enable dhcp_relay
disable dhcp_relay
show dhcp_relay
{ipif <ipif_name 12>}
config dhcp_relay option_60
state [enable | disable]
config dhcp_relay option_60 add
string <multiword 255> relay <ipaddr> [exact-match | partial-
match]
config dhcp_relay option_60 default
[relay <ipaddr> | mode [drop | relay]]
config dhcp_relay option_60 delete
[string <multiword 255> {relay <ipaddr>} | ipaddress
<ipaddr> | all | default {<ipaddr>}]
show dhcp_relay option_60
{[string <multiword 255> | ipaddress <ipaddr> | default]}
config dhcp_relay option_61
state [enable | disable]
config dhcp_relay option_61 add
[mac_address <macaddr> | string <desc_long 255>] [relay
<ipaddr> | drop]
config dhcp_relay option_61 default
[relay <ipaddr> | drop]
config dhcp_relay option_61 delete
[mac_address <macaddr> | string <desc_long 255> | all]
show dhcp_relay option_61
config dhcp_relay option_82 check
[enable | disable]
config dhcp_relay option_82 circuit_id
[default | user_define <sentence 32> | vendor1 | vendor2
| vendor3 | vendor4 | vendor5 | vendor6]
config dhcp_relay option_82 policy
[replace | drop | keep]
config dhcp_relay option_82 remote_id
[default | user_define <sentence 32> | vendor2 |
vendor3]
config dhcp_relay option_82 state
[enable | disable]
config dhcp_relay server_cvid
<ipaddr> [<vlan_id 1-4094> | null]
show dhcp_relay server_cvid
{<ipaddr>}
config dhcp_relay port_option_82
{<portlist>} [circuit_id | remote_id] vendor3 <string 32>
show dhcp_relay port_option_82
{<portlist>}
25-1
config dhcp_relay
Description
This command is used to configure the DHCP relay feature of the Switch.
Format
config dhcp_relay {hops <int 1-16> | time <sec 0-65535>}
Parameters
hops
- (Optional) Specify the maximum number of relay hops that the DHCP/BOOTP packets
can cross. The range is 1 to 16. The default value is 4. The DHCP packet will be dropped
when the relay hop count in the received packet is equal to or greater than this setting.
<int 1-16>
- Enter the maximum number of relay hops here. This value must be between 1
and 16.
Summary of Contents for xStack DGS-3120 Series
