xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
38
Chapter 4
802.1X Command List
enable 802.1x
disable 802.1x
create 802.1x user
<username 15>
delete 802.1x user
<username 15>
show 802.1x user
config 802.1x auth_protocol
[local | radius_eap]
config 802.1x fwd_pdu system
[enable | disable]
config 802.1x fwd_pdu ports
[<portlist> | all] [enable | disable]
config 802.1x authorization attributes
radius [enable | disable]
show 802.1x
{[auth_state | auth_configuration] ports {<portlist>}}
config 802.1x capability
ports [<portlist> | all] [authenticator | none]
config 802.1x max_users
[<value 1–448> | no_limit]
config 802.1x auth_parameter ports
[<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> |
supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | max_users [<value 1-448> | no_limit] | enable_reauth [enable
| disable]}(1)]
config 802.1x auth_mode
[port_based | mac_based]
config 802.1x init
[port_based ports [<portlist> | all] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
config 802.1x reauth
[port_based ports [<portlist> | all] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
create 802.1x guest_vlan
<vlan_name 32>
delete 802.1x guest_vlan
<vlan_name 32>
config 802.1x guest_vlan ports
[<portlist> | all] state [enable | disable]
show 802.1x guest_vlan
config 802.1x trap state
[enable | disable]
config radius add
<server_index 1-3> [<server_ip> | <ipv6addr>] [key <password 32> |
encryption_key <password 56>] [default | {auth_port <udp_port_number 1-65535 > | acct_port
<udp_port_number 1-65535 > | timeout <sec 1-255> | retransmit<int 1-20>}(1)]
config radius delete
<server_index 1-3>
config radius
<server_index 1-3> {ipaddress [<server_ip> | <ipv6addr>] | [key <password 32> |
encryption_key <password 56>] | auth_port [<udp_port_number 1-65535 > | default] |
acct_port [<udp_port_number 1-65535> | default] | timeout [<sec 1-255> | default] | retransmit
[<int 1-20> | default]}(1)
show radius
show auth_statistics
{ports <portlist>}
show auth_diagnostics
{ports <portlist>}
show auth_session_statistics
{ports <portlist>}
show auth_client
show acct_client
4-1
enable 802.1x
Description
This command is used to enable the 802.1X function.
Format
enable 802.1x
Summary of Contents for xStack DGS-3120 Series
