xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
437
DGS-3120-24TC:admin#config igmp_proxy upstream_if vlan default router_ports add
1:3
Command: config igmp_proxy upstream_if vlan default router_ports add 1:3
Success.
DGS-3120-24TC:admin#
41-5
show igmp_proxy
Description
This command displays IGMP proxy configuration information or group information on the switch.
The display status item means group entry is determined by whether or not the chip is inserted.
Format
show igmp_proxy {group}
Parameters
group
- (Optional) Specify the group information. If the group is not specified, the IGMP proxy
configuration will be displayed.
Restrictions
None.
Example
To display IGMP proxy information:
DGS-3120-24TC:admin#show igmp_proxy
Command: show igmp_proxy
IGMP Proxy Global State : Enabled
Upstream Interface
VLAN ID : 1
Dynamic Router Ports : 1-4
Static Router Ports : 5-6
Unsolicited Report Interval : 10
Source IP Address : 0.0.0.0
Downstream Interface
VLAN List : 2-4
DGS-3120-24TC:admin#
To display the IGMP proxy’s group information:
Summary of Contents for xStack DGS-3120 Series
