xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
620
DGS-3120-24TC:admin#show mirror
Command: show mirror
Mirror Global State: Enabled
Group ID : 1
State : Enabled
Target Port : 1:10
Source Ports
RX : 1:11-1:14
TX : 1:11-1:14
DGS-3120-24TC:admin#
60-5
create mirror group_id
Description
This command is used to a mirror group on the switch
Format
create mirror group_id <value 1-4>
Parameters
<value 1-4>
- Enter a mirro group identify value.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create mirror group 3:
DGS-3120-24TC:admin#create mirror group_id 3
Command: create mirror group_id 3
Success.
DGS-3120-24TC:admin#
60-6
config mirror group_id
Description
This command is used to configure mirror group’s parameters. It can configure mirror group’s
target port, state and source ports. The mirror group target port can’t be a member of all mirror
groups’ source ports. Each mirror group’s target port can be the same port. But each mirror
group’s source ports can’t overlap.
Summary of Contents for xStack DGS-3120 Series
