xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
802
Chapter 81
PIM for IPv6 Command List
(RI Mode Only)
config pim6
[ipif <ipif_name 12> | all] {hello_interval <sec 0-18000> | triggered_hello_delay <sec
0-60> | propagation_delay <sec 0-32> | override_interval <sec 0-65> | jp_interval <sec 0-
18000> | dr_priority <uint 0-4294967294> | bsr_border [disable | enable] | stub_interface
[disable | enable] | state [enable | disable]}(1)
show pim6
{ipif <ipif_name 12>}
config pim6 cbsr
{ipif <ipif_name 12> state [enable | disable] | priority <value 0-255> |
hash_masklen <value 0-128>}(1)
show pim6 cbsr
config pim6 crp
[rp <ipif_name 12> | all] {priority <value 0-255> | interval <sec 1-16383>}(1)
create pim6 crp group
<ipv6networkaddr> rp <ipif_name 12>
delete pim6 crp group
<ipv6networkaddr>
enable pim6
disable pim6
config pim6 last_hop_spt_switchover
[never | immediately]
show pim6 neighbor
{ipif <ipif_name 12>}
show pim6 mroute
{group <ipv6addr> {source <ipv6addr>}}
show pim6 mroute star_g
{group <ipv6addr> {ipif <ipif_name 12>}}
show pim6 mroute s_g
{rpt} {group <ipv6addr> source <ipv6addr> {ipif <ipif_name 12>}}
create pim6 static_rp group
<ipv6networkaddr> rp <ipv6addr> {override_dynamic}
delete pim6 static_rp group
<ipv6networkaddr>
config pim6 embedded_rp state
[enable | disable]
show pim6 crp
show pim6 static_rp
show pim6 rpset
config pim6 register_checksum_calculate
[include_data | not_include_data]
config pim6 register_probe_time
<sec 1-127>
config pim6 register_suppression_time
<sec 3-65535>
config pim6 keepalive_period
<sec 120-65535>
81-1
config pim6
Description
This command is used to set the PIM6 multicast protocol state and some related parameters in the
protocol on some interfaces.
Format
config pim6 [ipif <ipif_name 12> | all] {hello_interval <sec 0-18000> | triggered_hello_delay
<sec 0-60> | propagation_delay <sec 0-32> | override_interval <sec 0-65> | jp_interval <sec
0-18000> | dr_priority <uint 0-4294967294> | bsr_border [disable | enable] | stub_interface
[disable | enable] | state [enable | disable]}(1)
Parameters
ipif
- Specify to apply the configurations to this specific IP interface.
<ipif_name 12>
- Enter the IP interface name.
all
- Specify to apply the configurations to all IP interfaces.
Summary of Contents for xStack DGS-3120 Series
