xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
142
Multicast Filtering
IPv4 Multicast Filtering
IPv4 Multicast Profile Settings
Users can add a profile to which multicast address(s) reports are to be received on specified ports on the Switch.
This function will therefore limit the number of reports received and the number of multicast groups configured on
the Switch. The user may set an IPv4 Multicast address or range of IPv4 Multicast addresses to accept reports
(Permit) or deny reports (Deny) coming into the specified switch ports.
To view the following window, click
L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Multicast
Profile Settings
, as shown below:
Figure 4-98 IPv4 Multicast Profile Settings window
The fields that can be configured are described below:
Parameter
Description
Profile ID (1-24)
Enter a Profile ID between
1
and
24
.
Profile Name
Enter a name for the IP Multicast Profile.
Click the
Add
button to add a new entry based on the information entered.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Delete All
button to remove all the entries listed.
Click the
Group List
link to configure the multicast address group list settings for the specific entry.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specific entry.
After clicking the
Group List
link, the following window will appear:
Figure 4-99 Multicast Address Group List Settings window
The fields that can be configured are described below:
Parameter
Description
Multicast Address List
Enter the multicast address list.
Click the
Add
button to add a new entry based on the information entered.
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
