xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
330
The fields that can be configured are described below:
Parameter
Description
Unit
Select the unit to be displayed.
(EI and SI Mode Only)
From Port / To Port
Select a range of ports to be displayed.
Click the
Apply
button to accept the changes made.
NOTE:
The user must first globally enable
Authentication Mode
in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either
Port-based
or
MAC-based
.
Initialize Host-based Port(s)
This window is used to display the current initialized host-based ports.
To view this window, click
Security > 802.1X > Initialize Host-based Port(s)
as shown below:
Figure 8-19 Initialize Host-based Port(s) window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the unit to be displayed.
(EI and SI Mode Only)
From Port / To Port
Select a range of ports to be displayed.
MAC Address
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
Click the
Apply
button to accept the changes made.
NOTE:
The user must first globally enable
Authentication Mode
in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either
Port-based
or
MAC-based
.
Reauthenticate Port-based Port(s)
This window is used to display the current status of the re-authenticated port-based port(s).
To view this window, click
Security > 802.1X > Reauthenticate Port-based Port(s)
as shown below:
Figure 8-20 Reauthenticate Port-based Port(s) window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the unit to be displayed.
(EI and SI Mode Only)
From Port / To Port
Select a range of ports to be displayed.
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
