xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
381
Figure 8-77 Authentication Server Group Settings – Server Group List window
This window displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication
Server Groups that cannot be removed but can be modified. To add a new Server Group, enter a name in the
Group Name
field and then click the
Add
button. To modify a particular group, click the
Edit
button (or the
Edit
Server Group
tab), which will then display the following
Edit Server Group
tab:
Figure 8-78 Authentication Server Group Settings – Edit Server Group window
To add an Authentication Server Host to the list, enter its name in the
Group Name
field, IP address in the
IP
Address
field, use the drop-down menu to choose the
Protocol
associated with the IP address of the
Authentication Server Host, and then click
Add
to add this Authentication Server Host to the group. The entry
should appear in the Host List
at the bottom of this tab.
NOTE:
The user must configure Authentication Server Hosts using the Authentication Server Hosts
window before adding hosts to the list. Authentication Server Hosts must be configured for their
specific protocol on a remote centralized server before this function can work properly.
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
