xStack DGS-3400 Series Fast Ethernet Switch
To view the following window, click
Security Management > SSL
at the top of the window:
Figure 8- 25. Download Certificate menu
To download certificates, set the following parameters and click
Apply.
Parameter
Description
Certificate Type
Select Local or ??????????? to specifiy certificate type.
Server IP
Enter the IP address of the TFTP server where the certificate files are located.
Certificate File Name
Enter the path and the filename of the certificate file to download. This file must
have a .der extension. (Ex. c:/cert.der)
Key File Name
Enter the path and the filename of the key file to download. This file must have
a .der extension (Ex. c:/pkey.der)
Click
Apply
to implement changes made.
SSL Configuration
This screen will allow the user to enable SSL on the Switch and implement any one or combination of listed ciphersuites
on the Switch. A
ciphersuite
is a security string that determines the exact cryptographic parameters, specific encryption
algorithms and key sizes to be used for an authentication session. The Switch possesses four possible ciphersuites for the
SSL function, which are all enabled by default. To utilize a particular ciphersuite, disable the unwanted ciphersuites,
leaving the desired one for authentication.
When the SSL function has been enabled, the web will become disabled. To manage the Switch through the web based
management while utilizing the SSL function, the web browser must support SSL encryption and the header of the URL
must begin with https://. (Ex. https://xx.xx.xx.xx) Any other method will result in an error and no access can be authorized
for the web-based management.
163
Summary of Contents for xStack DGS-3427
