xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Sw itch
24
Managing the Switch for the First Time
The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
NOTE:
The passwords used to access the Switch are case-sensitive; therefore, "S" is not the same
as "s."
When you first connect to the Switch, you will be presented with the first login screen.
NOTE
: Press Ctrl+R to refresh the screen. This command can be used at any time to force the
console program in the Switch to refresh the console screen.
Press
Enter
in both the Username and Password fields. You will be given access to the command prompt
DGS-3627G:5#
shown
below:
There is no initial username or password. Leave the Username and Password fields blank.
DGS-3627 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 3.00.B11
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName:
PassWord:
DGS-3627:admin#
Figure 4- 2. Command Prompt
NOTE
: The first user automatically gets Administrator level privileges. It is recommended to create at
least one Admin-level user account for the Switch.