xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Sw itch
29
Web-based User Interface
The user interface provides access to various Switch configuration and management screens, allows the user to view performance
statistics, and permits graphical monitoring of the system status.
Areas of the User Interface
The figure below shows the user interface. Three distinct areas divide the user interface, as described in the table.
Figure 5 - 2 Main Web Manager window
Area Function
Area 1
Select the menu or window to display. Open folders and click the hyperlinked menu buttons and
subfolders contained within them to display menus. Click the D-Link logo to go to the D-Link
Website.
Area 2
Presents a graphical near real-time image of the front panel of the Switch. This area displays the
Switch's ports and expansion modules, showing port activity, duplex mode, or flow control,
depending on the specified mode.
Some management functions, including port configuration are accessible here.
Area 3
Presents switch information based on user selection and the entry of configuration data.
Web Pages
When connecting to the management mode of the Switch with a Web browser, a login screen is displayed. Initially, there is no
user name or password to access the Switch's management mode. Click the
OK
button to proceed.
Below is a list of the main folders available in the Web interface:
Administration
– Contains the following folders and windows: IP Address, IP MTU Settings, Stacking, Port Configuration, User
Accounts, Password Encryption, Mirror, System Log, System Severity Settings, Command Logging Settings, SNTP Settings,
MAC Notification Settings, TFTP Services, File System Services, RCP, Ping Test, IPv6 Neighbor, DHCP Auto Configuration
Settings, DHCP/BOOTP Relay, DHCP/BOOTP Local Relay Settings, DHCPv6 Relay, Layer 2 Protocol Tunneling Settings,
RSPAN, SNMP Manager, Trap Source Interface Settings, sFlow, and Single IP Management Settings.
L2 Features
– Contains the following folders and windows: VLAN, Trunking, IGMP Snooping, MLD Snooping, Loopback
Detection Global Settings, Spanning Tree, Forwarding & Filtering, LLDP, Q-in-Q, ERPS, DULD Settings, and NLB Multicast
Area 2
Area 1
Area 3