xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
9
4
B
ASIC
S
WITCH
C
OMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (with the appropriate parameters) in the following table.
Command Parameters
create account
[admin | operator | user] <username 15>
config account
<username>
show account
delete account
<username> {<string>}
show session
show switch
show serial_port
config serial_port
{baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet
<tcp_port_number 1-65535>
disable telnet
telnet
<ipaddr> {tcp_port <value 0-65535>}
enable web
<tcp_port_number 1-65535>
disable web
save
{[config {<drive_id>} <pathname 64> | log | all]}
reboot
{<string>}
reset
{[config |system]} {<string>}
login
logout
show device_status
config command_prompt
config greeting_message
{default}
show greeting_message
Each command is listed, in detail, in the following sections.
