xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
122
show 802.1p default_priority
Purpose
Used to display the currently configured 802.1p priority value that
will be assigned to an incoming, untagged packet before being
forwarded to its destination.
Syntax
show 802.1p default_priority {<portlist>}
Description The
show 802.1p default_priority
command displays the currently
configured 802.1p priority value that will be assigned to an
incoming, untagged packet before being forwarded to its
destination.
Parameters
<portlist>
−
Specifies a port or range of ports for which to display
the default-priority. The beginning and end of the port list range are
separated by a dash.
Restrictions None.
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DGS-3627:5# show 802.1p default_priority
Command: show 802.1p default_priority
Port Priority Effective Priority
---- ----------- ------------------
1:1 0 0
1:2 0 0
1:3 0 0
1:4 0 0
1:5 0 0
1:6 0 0
1:7 0 0
1:8 0 0
1:9 0 0
1:10 0 0
1:11 0 0
1:12 0 0
1:13 0 0
1:14 0 0
1:15 0 0
1:16 0 0
1:17 0 0
1:18 0 0
1:19 0 0
1:20 0 0
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
