xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
200
show mld_snooping mrouter_ports
Purpose
Used to display the current router ports set on the Switch.
Syntax
show mld_snooping mrouter_ports {vlan<vlan_name 32} {[static |
dynamic | forbidden]}
Description
This command display the current router ports set on the Switch.
Parameters
vlan <vlan_name 32>
−
The name of the VLAN on which the router port
resides.
static
– Displays router ports that have been statically configured.
dynamic
– Displays router ports that have been dynamically configured.
forbidden
– Displays router ports that have been configured as forbidden.
If no parameter is specified, the Switch will display all currently configured
router ports on the Switch.
Restrictions None.
Example usage:
To display the MLD snooping multicast router port settings:
DGS-3627:5#show mld_snooping mrouter_ports
Commands : show mld_snooping mrouter_ports
VLAN Name : default
Static mrouter port : 1-10
Dynamic mrouter port :
Forbidden mrouter port :
Total Entries : 1
DGS-3627:5#
show mld_snooping forwarding
Purpose
Used to display the MLD snooping forwarding table entries on the Switch.
Syntax
show mld_snooping forwarding {vlan <vlan_name 32>}
Description
This command will display the current MLD snooping forwarding table entries
currently configured on the Switch.
Parameters
<vlan_name 32>
−
The name of the VLAN for which to view MLD snooping
forwarding table information.
Restrictions None.
