xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
210
create dhcp pool manual_binding
Purpose
Used to create a DHCP pool manual binding entry.
Syntax
create dhcp pool manual_binding <pool_name 12> <ipaddr>
hardware_address <macaddr> {type [Ethernet | IEEE802]}
Description
This command will create a DHCP manual pool binding entry for a
previously created pool. When a MAC address is entered in this
command, it will be bound to a IP address from the given pool either by
the user, or automatically by the Switch.
Parameters
<pool_name 12>
−
Enter the name of the previously created pool that
will contain the manual binding entry.
<ipaddr>
−
Enter the IP address to be statically bound to a device
within the local network that will be specified by entering the Hardware
Address in the following field.
hardware_address <macaddr>
−
Enter the MAC address of the device
to be statically bound to the IP address entered in the previous field.
type
[Ethernet | IEEE802]
−
This field is used to specify the type of
connection for which this manually bound entry will be set.
Ethernet
will
denote that the manually bound device is connected directly to the
Switch, while the
IEEE802
denotes that the manually bound device is
outside the local network of the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To create a manual binding DHCP entry:
DGS-3627:5# create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 02.02.02.02.02.02 type Ethernet
Command: create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 02.02.02.02.02.02 type Ethernet
Success.
DGS-3627:5#
delete dhcp pool manual_binding
Purpose
Used to delete a previously created DHCP manual binding entry.
Syntax
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
Description
This command will delete a DHCP manual binding entry created with
the
create dhcp pool manual_binding
command.
Parameters
<pool_name 12>
−
Enter the previously created pool name from which
to delete a manual binding DHCP entry.
<ipaddr>
−
Enter the IP address of the manual binding entry to be
deleted.
all
– Enter this command to delete all manual binding entries for the
given pool.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a manual binding DHCP entry:
