xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
231
DGS-3627:5#config limited_multicast_addr ports 5-8 access permit
Command: config limited_multicast_addr ports 5-8 add access permit
Success.
DGS-3627:5#
show limited_multicast_addr
Purpose
Used to display the limited multicast address range on a per port basis.
Syntax
show limited_muticast_addr {ports <portlist>}
Description
This command will display the limited multicast address range on a per
port basis.
Parameters
ports <portlist>
−
Enter a port or list of ports to be displayed. The
beginning and end of the port list range are separated by a dash. Non-
contiguous portlist entries are separated by a comma. (ex: 1-3,7-9)
Entering this command without the portlist parameter will display the
limited multicast range for all ports on the switch.
Restrictions None.
Example usage:
To display the multicast range Trinity:
DGS-3627:5#show limited_multicast_addr ports 5
Command: show limited_multicast_addr ports 5
Port : 5
State : Disabled
Access : None
No. Name From To
----- --------------- ----------------- ---------------
1 accounting 224.19.62.34 224.19.62.200
Total Entries: 1
DGS-3627:5#
