xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
269
DGS-3627:5#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3627:5#
show
cpu_access_profile
Purpose
Used to view the CPU access profile entry currently set in the Switch.
Syntax
show
cpu access_profile
{profile_id <value 1-5>}
Description
The
config cpu_interface_filtering state
command is used view the current CPU
interface filtering entries set on the Switch.
Parameters
profile_id <value 1-5>
−
Enter an integer between
1
and
5
that is used to identify
the CPU access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the
create
cpu access_profile
command. Entering this command without the profile ID parameter will display all
configured CPU access profiles.
Restrictions None.
Example usage:
To show the CPU filtering state on the Switch:
DGS-3627:5#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Access Profile ID: 1 TYPE : Ethernet
================================================================================
MASK Option :
VLAN
---------- ------
Access ID: 2 Mode: Permit
Ports: 1
---------------------
default
================================================================================
Total Entries: 1
DGS-3627:5#
