xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
288
DGS-3627:5#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Success.
DGS-3627:5#
show sntp
Purpose
Used to display the SNTP information.
Syntax
show sntp
Description
This command will display SNTP settings information including the
source IP address, time and poll interval.
Parameters None.
Restrictions None.
Example usage:
To display SNTP configuration information:
DGS-3627:5#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 720 sec
DGS-3627:5#
enable sntp
Purpose
To enable SNTP server support.
Syntax
enable sntp
Description
This will enable SNTP support. SNTP service must be separately
configured (see
config sntp
). Enabling and configuring SNTP
support will override any manually configured system time settings.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this
command. SNTP settings must be configured for SNTP to function
(
config sntp
).
Example usage:
To enable the SNTP function:
