xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
378
51
MAC
N
OTIFICATION
C
OMMANDS
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their appropriate
parameters.
Command Parameters
enable mac_notification
disable mac_notification
config mac_notification
{interval <int 1-2147483647> | historysize <int 1-500>}
config mac_notification ports
[<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports
{<portlist>}
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Used to enable global MAC address table notification on the Switch.
Syntax
enable mac_notification
Description
This command is used to enable MAC address notification without
changing configuration.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable MAC notification without changing basic configuration:
DGS-3627:5#enable mac_notification
Command: enable mac_notification
Success.
DGS-3627:5#
disable mac_notification
Purpose
Used to disable global MAC address table notification on the Switch.
Syntax
disable mac_notification
Description
This command is used to disable MAC address notification without
changing configuration.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable MAC notification without changing basic configuration:
