xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
389
The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command Parameters
enable authen_policy
disable authen_policy
show authen_policy
create authen_login method_list_name
<string 15>
config authen_login
[default | method_list_name <string 15>] method {tacacs |
xtacacs | | radius | server_group <string 15> | local |
none}
delete authen_login method_list_name
<string 15>
show authen_login
{default | method_list_name <string 15> | all}
create authen_enable method_list_name
<string 15>
config authen_enable
[default | method_list_name <string 15>] method {tacacs |
xtacacs | | radius | server_group <string 15> |
local_enable | none}
delete authen_enable method_list_name
<string 15>
show authen_enable
[default | method_list_name <string 15> | all]
config authen application
{console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
show authen application
create authen server_group
<string 15>
config authen server_group
[tacacs | xtacacs | | radius | <string 15>] [add | delete]
server_host <ipaddr> protocol [tacacs | xtacacs | |
radius]
delete authen server_group
<string 15>
show authen server_group
<string 15>
create authen server_host
<ipaddr> protocol [tacacs | xtacacs | | radius] {port <int
1-65535> | key [<key_string 254> | none] | timeout <int 1-255> |
retransmit <int 1-255>}
config authen server_host
<ipaddr> protocol [tacacs | xtacacs | | radius] {port <int
1-65535> | key [<key_string 254> | none] | timeout <int 1-255> |
retransmit <int 1-255>}
delete authen server_host
<ipaddr> protocol [tacacs | xtacacs | | radius]
show authen server_host
config authen parameter response_timeout
<int 0-255>
config authen parameter attempt
<int 1-255>
show authen parameter
enable admin
config admin local_enable
Each command is listed, in detail, in the following sections.
