xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
432
config lldp dot1_tlv_protocol_identity
Purpose
Used to configure an individual port or group of ports to exclude one
or more of IEEE 802.1 organization protocol identity TLV data types
from outbound LLDP advertisements.
Syntax
config lldp ports [<portlist>|all] dot1_tlv_ protocol_identity [all |
{eapol | lacp | gvrp | stp } [enable | disable]
Description
This TLV optional data type indicates whether the corresponding
Local System's Protocol Identity instance will be transmitted on the
port. The Protocol Identity TLV provides a way for stations to
advertise protocols that are important to the operation of the network.
Such as Spanning Tree Protocol, the Link Aggregation Control
Protocol, and numerous vendor proprietary variations are responsible
for maintaining the topology and connectivity of the network. If
EAPOL, GVRP, STP (including MSTP), and LACP protocol identity is
enabled on this port and it is enabled to be advertised, then this
protocol identity will be advertised.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
all
– Use this parameter to set all ports in the system.
dot1_tlv_protocol_identity
– This TLV optional data type indicates
whether the corresponding Local System's Protocol Identity instance
will be transmitted on the port. The Protocol Identity TLV provides a
way for stations to advertise protocols that are important to the
operation of the network, such as Spanning Tree Protocol, the Link
Aggregation Control Protocol, and numerous vendor proprietary
variations which are responsible for maintaining the topology and
connectivity of the network. If EAPOL, GVRP, STP (including MSTP),
and LACP protocol identity is enabled on this port and it is enabled to
be advertised, then this protocol identity will be advertised. The
default state is disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure exclude the protocol identity TLV from the outbound LLDP advertisements for all ports:
DGS-3627:5#config lldp ports all dot1_tlv_protocol_identity all
enable
Command: config lldp ports all dot1_tlv_protocol_identity all
enable
Success.
DGS-3627:5#
config lldp dot3_tlvs
Purpose
Used to configure an individual port or group of ports to exclude one
or more of IEEE 802.3 oganization specific TLV data types from
outbound LLDP advertisements.
Syntax
config lldp ports [<portlist>|all] dot3_tlvs [all |
{mac_phy_configuration_status | link_aggregation |
maximum_frame_size}] [enable | disable]
Description
Each Specific TLV in this extension can be enabled individually.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
all
– Use this parameter to set all ports in the system.
mac_phy_configuration_status
– This TLV optional data type indicates
that LLDP agent should transmit 'MAC/PHY configuration/status TLV'.
