xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
478
show qinq port
Purpose
Used to show a port’s QinQ mode status.
Syntax
show qinq ports {<portlist>}
Description
The command is used to show the qinq configuration for a port,
including:
port role in QinQ mode, miss drop and port outer TPID that is applied to
the port.
Parameters
<portlist>
– Specifies a range of ports to be displayed.
If no parameter is specified, the system will display all port information.
Restrictions None.
Example usage:
To display QinQ mode for ports 1 to 8 of unit 1:
DGS-3627:5#show qinq ports 1:1-1:8
Command: show qinq ports 1:1-1:8
Port Role Missdrop TPID
----- ------ -------- ----------
1:1 NNI Disabled 0x88A8
1:2 NNI Disabled 0x88A8
1:3 NNI Disabled 0x88A8
1:4 NNI Disabled 0x88A8
1:5 NNI Disabled 0x88A8
1:6 NNI Disabled 0x88A8
1:7 NNI Disabled 0x88A8
1:8 NNI Disabled 0x88A8
DGS-3627:5#
