xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
49
DGS-3627:5#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DGS-3627:5#
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description The
delete snmp group
command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32>
−
An alphanumeric name of up to
32
characters that
will identify the SNMP group with which the new SNMP user will be
associated.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DGS-3627:5#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3627:5#
show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group are
also displayed.
Syntax
show snmp groups
Description The
show snmp groups
command displays the group-names of
SNMP groups currently configured on the Switch. The security model,
level, and status of each group are also displayed.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To display the currently configured SNMP groups on the Switch:
