xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
4
DGS-3627:5#?
Command: ?
..
?
cd
clear
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear attack_log
clear counters
clear dhcp_binding
clear fdb
clear log
clear mac_based_access_control auth_mac
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Figure 2- 2. The ? Command
When users enter a command without its required parameters, the CLI will prompt a
Next possible completions:
message.
DGS-3627:5#config account
Command: config account
Next possible completions:
<username>
DGS-3627:5#
Figure 2- 3. Example Command Parameter Help
In this case, the command
config account
was entered with the parameter
<username>
. The CLI will then prompt to enter the
<username>
with the message,
Next possible completions:
. Every command in the CLI has this feature, and complex commands
have several layers of parameter prompting.
In addition, after typing any given command plus one space, all of the next possible sub-commands can be seen, in sequential order,
by repeatedly pressing the
Tab
key.
