xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
70
DGS-3627:5#show boot_file
Command: show boot_file
-----------------------------------------------------
Unit ID : 1
Boot up firmware image : C:\RUN.HAD
Boot up configuration file: C:\STARTUP.CFG
-----------------------------------------------------
DGS-3627:5#
show storage_media_info
Purpose
Used to view flash memory information on the Switch.
Syntax
show storage_media_info {[unit <unitid 1-12> | all]}
Description
This command will display information regarding the internal flash
memory of the Switch. This command will display the following
information:
Drive: The name of the drive of the storage media accessory.
Media_Type: Description of the type of storage media accessory
currently in use.
Size: Description of the size of memory space available on the
storage media accessory.
Label: Description assigned to this storage media accessory.
FS_Type: Description of the type of format of this storage media
accessory.
Parameters
unit <unit_id 1-12>
– Select the switch in the switch stack where
the storage media information is located, denoted by unit ID
number.
all
– Enter this parameter to display the storage media information
on all switches in the switch stack.
Restrictions None.
Example usage:
To view the storage media accessory information:
DGS-3627:5#show storage_media_info
Command: show storage_media_info
------------------------------------------------------
Unit ID is 1
Drive Media_Type Size Label FS_Type
C: Flash 15 MB FLASH-A FAT16
------------------------------------------------------
DGS-3627:5#
