xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
78
To display the packets analysis for port 2:
DGS-3627:5#show packet ports 2
Command: show packet ports 2
Port number : 1:2
==================================================================
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 0 0
65-127 0 0
128-255 0 0
256-511 0 0
512-1023 0 0
1024-1518 0 0
Unicast RX 0 0
Multicast RX 0 0
Broadcast RX 0 0
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 0 0
RX Frames 0 0
TX Bytes 0 0
TX Frames 0 0
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
p
Previous Page
r
Refresh
show error ports
Purpose
Used to display the error statistics information for a range of ports.
Syntax
show error ports <portlist>
Description
This command will display all of the packet error statistics collected
and logged by the Switch for a given port list.
Parameters
<portlist>
−
Specifies a port or range of ports to be displayed. The
beginning and end of the port list range are separated by a dash.
Restrictions None.
Example usage:
To display the errors of the port 3:
