xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
83
clear attack_log
Purpose
Used to clear the switch history of attack log files.
Syntax
clear attack_log {[unit <unit_id 1-12> | all]}
Description
This command will clear the contents of the attack log of the Switch.
Parameters
unit <unit_id 1-12>
– Select the switch in the switch stack for which
to clear attack log files.
all
– Entering this parameter will clear all attack log files in the
switch stack.
Restrictions
Only Administrator and Operator-level users can issue this
command.
Example usage:
To clear the attack log
:
DGS-3627:5#clear attack_log
Command: clear attack_log
Success.
DGS-3627:5#
enable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description The
enable syslog
command enables the system log to be sent to
a remote host.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this
command.
Example usage:
To the syslog function on the Switch:
DGS-3627:5#enable syslog
Command: enable syslog
Success.
DGS-3627:5#
disable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax
disable syslog
Description The
disable syslog
command disables the system log to be sent to a
remote host.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
