xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 3- 47. Router Port window (Modify)
The following parameters can be set:
Parameter Description
VID (VLAN ID)
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN where the MLD
multicast router is attached.
VLAN Name
This is the name of the VLAN where the MLD multicast router is attached.
Unit
Select the unit you wish to configure.
Member Ports
Ports on the Switch that will have a multicast router attached to them. There are three options
for which to configure these ports:
None
– Click this option to not set these ports as router ports
Static
– Click this option to designate a range of ports as being connected to a multicast-
enabled router. This command will ensure that all packets with this router as its destination will
reach the multicast-enabled router.
Forbidden
– Click this option to designate a port or range of ports as being forbidden from
being connected to multicast enabled routers. This ensures that these configured forbidden
ports will not send out routing packets.
Click
Apply
to implement the new settings.
129
