xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
DHCP Server Dynamic Binding
The following window will allow users to view dynamically bound IP addresses of the DHCP server. These IP addresses are ones
that were allotted to clients on the local network and are now bound to the device stated by its MAC address.
To view this window, click
L3 Features > DHCP Server > DHCP Server Dynamic Binding
, as shown below:
Figure 4- 80. DHCP Server Dynamic Binding Table window
The following parameters may be configured or viewed.
Parameter Description
Pool Name
To find the dynamically bound entries of a specific pool, enter the Pool Name into the field and click
Find
. Dynamically bound entries of this pool will be displayed in the table. To clear the
corresponding Pool Name entries of this table, click
Clear
. To clear all entries, click
Clear All
.
Pool Name
This field will denote the Pool Name of the displayed dynamically bound DHCP entry.
IP Address
This field will display the IP address allotted to this device by the DHCP Server feature of this
Switch.
Hardware
Address
This field will display the MAC address of the device that is bound to the corresponding IP address.
Type
This field will display the type of node server being used for the previously configured Net BIOS
Name server of this entry.
Status
This field will display the Status of the entry, whether it was dynamically bound or manually bound.
Life Time (sec)
This field will display, in seconds, the time remaining on the lease for this IP address.
237
