xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Virtual MAC Address
The MAC address of the device that holds the Virtual router.
Virtual Router State
Displays the current status of the virtual router. Possible states include Initialize, Master and
Backup.
State
Displays the current state of the router.
Priority
Displays the priority of the virtual router. A higher priority will increase the probability that this
router will become the Master router of the group. A lower priority will increase the
probability that this router will become the backup router. The lower the number, the higher
the priority.
Master IP Address
Displays the IP address of the Master router for the VRRP function.
Critical IP Address
Displays the critical IP address of the VRRP function. This address will judge if a virtual
router is qualified to be a master router.
Checking Critical IP
Displays the status of the Critical IP address. May be enabled or disabled.
Advertisement
Interval
Displays the time interval, in seconds, which VRRP messages are sent out to the network.
Preempt Mode
Displays the mode for determining the behavior of backup routers set on this VRRP
interface. True will denote that this will be the backup router, if the routers priority is set
higher than the master router. False will disable the backup router from becoming the
master router.
Virtual Router Up
Time
Displays the time, in minutes, since the virtual router has been initialized
To edit the settings for a particular VRRP setting, click
L3 Features > VRRP > VRRP Virtual Router Settings
, which will
display the following window:
Figure 4- 110. VRRP Virtual Router Settings window
Click the hyperlink VRID / Interface Name that you want to edit to display the following window:
Figure 4- 111. VRRP Virtual Router Settings - Edit window
256
