xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Password Encryption
This window is used to set the password encryption state.
To view this window, click
Administration
>
Password Encryption
, as shown below:
Figure 2- 19. Password Encryption window
The following parameters can be configured:
Parameter
Description
Encryption State
Use the pull-down menu to enable or disable the password encryption. Select
Enabled
to
change the password into encrypted form. When password encryption is
Disabled
, the
password will be in plain text form. However, if the user specifies the password in encrypted
form, or if the password has been converted to encrypted form by the last
enable password
encryption
command in the CLI, the password will still be in encrypted form and cannot be
reverted back to plaintext form.
Click
Apply
to implement the changes.
23
