manualshive.com logo in svg

D-Link xStack DGS-3612G series, Reference Manual

The D-Link xStack DGS-3612G series is a high-performance switch designed for seamless network management. With advanced specifications and reliable performance, this product allows for efficient data transmission. Available for free download, the user manual can be found on our website, ensuring seamless setup and operation.

Share
Download
background image

xStack

®

 DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 

To set JWAC for the Switch, complete the following fields: 

Parameter                       

 Description 

JWAC Global Settings 

JWAC Global State 

Use this drop-down menu to either enable or disable JWAC on the Switch.  

JWAC Settings 

Forcible Logout 

This parameter enables or disables JWAC Forcible Logout. When Forcible Logout is 

Enabled

, a Ping packet from an authenticated host to the JWAC Switch with TTL=1 will be 

regarded as a logout request, and the host will move back to the unauthenticated state. 

UDP Filtering 

This parameter enables or disables JWAC UDP Filtering. When UDP Filtering is 

Enabled

, all 

UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be 
dropped 

RADIUS Protocol 

This parameter specifies the RADIUS protocol used by JWAC to complete a RADIUS 
authentication. The options include 

Local

, 

EAP

 

MD5

, 

PAP

, 

CHAP

, 

MS CHAP

, and 

MS 

CHAPv2

. 

Redirect State 

This parameter enables or disables JWAC Redirect. When the redirect quarantine server is 
enabled, the unauthenticated host will be redirected to the quarantine server when it tries to 
access a random URL. When the redirect JWAC login page is enabled, the unauthenticated 
host will be redirected to the JWAC login page in the Switch to finish authentication. When 
redirect is disabled, only access to the quarantine server and the JWAC login page from the 
unauthenticated host are allowed, all other web access will be denied. NOTE: When enabling 
redirect to the quarantine server, a quarantine server must be configured first. 

Redirect Destination 

This parameter specifies the destination before an unauthenticated host is redirected to either 
the 

Quarantine Server

 or the 

JWAC Login Page

. 

Redirect Delay Time 
(0-10 sec) 

This parameter specifies the Delay Time before an unauthenticated host is redirected to the 
Quarantine Server or JWAC Login Page. Enter a value between 

0

 and 

10

 seconds. A value 

of 

0

 indicates no delay in the redirect. 

Virtual IP 

This parameter specifies the JWAC Virtual IP address that is used to accept authentication 
requests from an unauthenticated host. Only requests sent to this IP will get a correct 
response. NOTE: This IP does not respond to ARP requests or ICMP packets. 

URL 

This parameter is used to set the URL of the virtual IP. Clients can use this FQDN URL to 
access the JWAC login page instead of the real virtual IP. 

HTTP(S) Port (1-
65535) 

This parameter specifies the TCP port number that the JWAC Switch listens to and uses to 
finish the authentication process.   

JWAC Authorization Network Settings 

RADIUS 
Authorization 

If 

Enabled

, the authorized data assigned by the RADUIS server will be accepted when the 

global authorization attributes are enabled. The default state is 

Enabled

. 

Local Authorization 

If 

Enabled

, the authorized data assigned by the Local database will be accepted if the global 

authorization attributes are enabled. The default state is 

Enabled

. 

Quarantine Server Settings 

Quarantine Server 
Monitor 

This parameter enables or disables the JWAC Quarantine Server Monitor. When 

Enabled

, 

the JWAC Switch will monitor the Quarantine Server to ensure the server is okay. If the 
Switch detects no Quarantine Server, it will redirect all unauthenticated HTTP access 
attempts to the JWAC Login Page forcibly if the Redirect is enabled and the Redirect 
Destination is configured to be a Quarantine Server. 

 

409

Summary of Contents for xStack DGS-3612G series



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3612G series

D-Link DI-707 User Manual preview
DI-707
Brand: D-Link Pages: 36
3Com Baseline 2226 Plus Datasheet preview
Baseline 2226 Plus
Brand: 3Com Pages: 4
Generac Power Systems GenReady Series 005448-2 Overview preview
GenReady Series 005448-2
Brand: Generac Power Systems Pages: 4
Zamel GRG-01 Quick Start Manual preview
GRG-01
Brand: Zamel Pages: 2
3onedata ES1026-2F Quick Installation Manual preview
ES1026-2F
Brand: 3onedata Pages: 2
Key Digital KD-PS42 Manual preview
KD-PS42
Brand: Key Digital Pages: 31
Wavetronix Click 223 Installation preview
Click 223
Brand: Wavetronix Pages: 3
Soyntec Nexoos 370 Series User Manual preview
Nexoos 370 Series
Brand: Soyntec Pages: 7
IPGARD SA-DVN-2S Quick Start Manual preview
SA-DVN-2S
Brand: IPGARD Pages: 2
Accton Technology ES4710BD User Manual preview
ES4710BD
Brand: Accton Technology Pages: 547
Eaton NZM3-XTVD-HS Instruction Leaflet preview
NZM3-XTVD-HS
Brand: Eaton Pages: 5
Intel Express 550F User Manual preview
Express 550F
Brand: Intel Pages: 162
C4i HDC-SPB116 User Manual preview
HDC-SPB116
Brand: C4i Pages: 7
Farallon Fast Starlet User Manual preview
Fast Starlet
Brand: Farallon Pages: 22
StarTech.com VS221HD20 Quick Start Manual preview
VS221HD20
Brand: StarTech.com Pages: 2
BluStream SW41HDBT Quick Reference Manual preview
SW41HDBT
Brand: BluStream Pages: 4
Kramer VS-24xl User Manual preview
VS-24xl
Brand: Kramer Pages: 11
Intermatic T2006 Supplementary Manual preview
T2006
Brand: Intermatic Pages: 1

Brands by name

Popular brands

Load more brands