xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 2- 69. SNMP User Table Configuration window
The following parameters can set:
Parameter Description
User Name
Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP user.
Group Name
This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version
V3
- Specifies that SNMP version 3 will be used.
SNMP V3 Encryption
SNMP v3 provides secure access to devices through a combination of authentication and
encrypting packets over the network. Use the drop down menu to select the type of SNMP
V3 encryption to be applied. The user can choose between
None
,
Password
or
Key
.
Auth-Protocol by
Password / Key
MD5
- Specifies that the HMAC-MD5-96 authentication level will be used. This is only
operable when
V3
is selected in the SNMP Version field and the Encrypted check box has
been ticked. This field will require the user to enter a password.
SHA
- Specifies that the HMAC-SHA authentication protocol will be used. This is only
operable when
V3
is selected in the SNMP Version field and the Encrypted check box has
been ticked. This field will require the user to enter a password between 8 and 16
alphanumeric characters.
Priv-Protocol by
Password / Key
None
- Specifies that no privacy (encryption) protocol is in use.
DES
- Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56)
standard. This field is only operable when
V3
is selected in the SNMP Version field and the
Encrypted check box has been ticked. This field will require the user to enter a password
between 8 and 16 alphanumeric characters.
To implement changes made, click
Apply
. To return to the SNMP User Table, click the
Show All SNMP User Table Entries
link.
65
