xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
129
static
- Displays the static entries to the ARP table.
mac_address
- Displays the ARP entry by MAC address.
<macaddr>
- Specify the MAC address.
Note:
If no parameter is specified, all ARP entries will be displayed.
Restrictions
None.
Example
To display the ARP table:
DGS-3620-28SC:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.90.90.90 00-01-02-03-04-00 Local
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries: 3
DGS-3620-28SC:admin#
7-6
clear arptable
Description
This command is used to remove dynamic entries from the ARP table. Static ARP entries are not
affected.
Format
clear arptable
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove the dynamic entries from the ARP table:
